Page 1 of 2

Electro Lobotomy Instruments

Posted: Sun Apr 11, 2021 5:49 pm
by iNtox-Z
If someone has tools from this office at their disposal, i suggest sharing video materials and various commutations.
Electro lobotomy is based on the creation of noise devices.


Important! Only with yours videos, videos from YouTube are outdated for a long time and at the moment the Electro Lobotomy has many modified tools.

_________________________________________________________________________________________________________________________________________________________________
https://www.etsy.com/shop/ElectroLoboto ... =287115887

Re: Electro Lobotomy Instruments

Posted: Tue Apr 13, 2021 4:51 pm
by melko
xd0xa1xd1x83xd1x80xd0xbexd0xb2xd0xbexd0xb5 xd1x83xd1x81xd1x82xd1x80xd0xbexd0xb9xd1x81xd1x82xd0xb2xd0xbe xd0xbexd0xb1xd1x80xd0xb0xd1x82xd0xbdxd0xbexd0xb9 xd1x81xd0xb2xd1x8fxd0xb7xd0xb8 xd1x81 xd0xb2xd0xb2xd0xbexd0xb4xd0xbexd0xbc xd1x80xd0xb5xd0xb7xd1x8exd0xbcxd0xb5

AttFAM xd1x81 xd0xb1xd0xb0xd0xbdxd0xb0xd0xbdxd0xbexd0xb2xd1x8bxd0xbcxd0xb8 xd0xb4xd0xbexd0xbcxd0xbaxd1x80xd0xb0xd1x82xd0xb0xd0xbcxd0xb8

2 xd0xbexd1x81xd1x86xd0xb8xd0xbbxd0xbbxd1x8fxd1x82xd0xbexd1x80xd0xb0 xd0xb1xd0xb5xd1x81xd0xbfxd0xb8xd0xbbxd0xbexd1x82xd0xbdxd0xbexd0xb9 xd0xbaxd0xbexd1x80xd0xbexd0xb1xd0xbaxd0xb8
No idea what they do, but the names are great :lol:

Re: Electro Lobotomy Instruments

Posted: Sun Apr 25, 2021 6:44 am
by The Mysterious Creep
My first contact mic-based device was their Sonic Forest, it's in a few of my old videos.



Hasn't been featured for a while because I liked to play it with drumsticks, which ultimately broke off most of the bass strings.

Re: Electro Lobotomy Instruments

Posted: Fri May 14, 2021 10:13 pm
by iNtox-Z
I created a new set of patches, the sound is raw and distortion is fed only from the tablet to the Line-In of the Neutron, on the output, for the most part, the Neutron sounds without additional effects.





Still Waiting For Particle Smasher with CV ins / Stomp Box version // Noise Device / Synth / Sound Generator // signal processor // effect unit!

Hope it will be great instrument.

It's scary to imagine what will happen when you pass it through the Particle Smasher and then eat the distortion.

Hey!!! Soloman_Tump do you have this - AttFAM Attenuator Electro Lobotomy?

A larger number of possible harmonics are opening, I played only a part and was very nervous, it's badly it turns out the most awesome when I do not record...

Re: Electro Lobotomy Instruments

Posted: Thu May 20, 2021 3:14 pm
by iNtox-Z
Got next two apparatus from Electro Lobotomy, Particle Smasher & Cut Up Mixer.
Uploading video, there are Particle Smasher No Input Signal (FX Loop) with two Distortion & Parametric EQ.

Re: Electro Lobotomy Instruments

Posted: Thu May 20, 2021 3:46 pm
by iNtox-Z

Re: Electro Lobotomy Instruments

Posted: Thu May 20, 2021 10:02 pm
by iNtox-Z

Re: Electro Lobotomy Instruments

Posted: Fri May 28, 2021 5:07 pm
by iNtox-Z
OK, Now it's HARH NOISE :jason:


Re: Electro Lobotomy Instruments

Posted: Tue Jul 06, 2021 7:36 am
by The Mysterious Creep
iNtox-Z wrote: Thu May 20, 2021 3:14 pm Got next two apparatus from Electro Lobotomy, Particle Smasher & Cut Up Mixer.
Uploading video, there are Particle Smasher No Input Signal (FX Loop) with two Distortion & Parametric EQ.
Image
Image
That Particle Smasher looks insane, did you buy it like that or was it a custom job? As far as I knew, every Electro Lobotomy pedal was just stock brushed aluminum (considering buying a Particle Smasher myself).

Re: Electro Lobotomy Instruments

Posted: Tue Jul 06, 2021 8:34 pm
by iNtox-Z
The Mysterious Creep wrote: Tue Jul 06, 2021 7:36 am
iNtox-Z wrote: Thu May 20, 2021 3:14 pm Got next two apparatus from Electro Lobotomy, Particle Smasher & Cut Up Mixer.
IMG_20210707_093841.jpg
IMG_20210707_063828.jpg
Viewed 1779 times
That Particle Smasher looks insane, did you buy it like that or was it a custom job? As far as I knew, every Electro Lobotomy pedal was just stock brushed aluminum (considering buying a Particle Smasher myself).
At first i asked the seller to make a template from a regular sheet and draw a pencil around all the holes on the lid, otherwise i would have had very difficult time. Then i created this drawing from one photo in Photoshop and made holes in the photo according to the template, after which i glued and screwed back the knobs. I will redo it, because i didn't make it very well and this is a glossy photo, i will take a matte photo so that it does not shine in the light.
You can also ask the seller to put other knobs or ask them to make a matte black case instead of an aluminum case.