NOISEBOB wrote: ↑Fri Mar 12, 2021 1:57 pmLORD CHAOS
chaotic mixer of some kind.
8 inputs to 2 outputs
which input goes to an output is controlled by two oscillators
or external LFO.,..
purely conceptual.
should work...
hmmmmmmmmmmmmmmmmmmmmmmm
. yes, i know there are no decoupling capacitors there.. also the remaining two parts of the 4093 shall be pulled-down.
Automatic Cut-up generator?
Y'know, I thought that kinda sarcastically but I'd totally do it.
Even if you took a few years and learned all the chords you'd still have a limited number of options. If you ignore the chords your options are infinite and you can master guitar playing in one day. - David Fair
If you tickle the inhibit pin on the 4052 it will interrupt signals without the addition of another IC. However, it interrupts ALL signals, so a 4066 would be a fine choice if your cutups are to be selective.
crochambeau wrote: ↑Sat Mar 13, 2021 6:42 am
If you tickle the inhibit pin on the 4052 it will interrupt signals without the addition of another IC. However, it interrupts ALL signals, so a 4066 would be a fine choice if your cutups are to be selective.
since i made that (15 minutes ago), i have decided to remove the 4093 control oscillators from the design and stick to the rule of A.M.A.P. (as modular as possible)...
fucking hell.. the reason i never finish anything is because i end up adding more and more crap to my designs.
i just wanted to make a quick and dirty chaotic mixer... now i am looking at something consisting of at least 16 chips... because of course i need to be able to mute and invert all signals, both globally and left/right (i am limiting myself a little bit as i could add mutes and inverters to each input),,, ....
timdrage wrote: ↑Sat Apr 03, 2021 8:46 am
woah the 4067 things sounds interesting, gives me some ideas too, never looked at Multiplexer ICs !
multiplexers are great...
i have an idea to make a 8 to 8 switch using two 4051s... oscs to control which of the 8 inputs to select and oscs to control which output to select.....
